SPM 500 WETKRET
Описание
The standard version of the SPM 500 WETKRET series is operated electrically and includes an electric air compressor built into the chassis. The equipment is also optionally available with a diesel drive system, allowing operation in places without electrical power supply. Controlled by remote control with an automatic spray lance movement and nozzle oscillation, the operator can fully concentrate on spraying finish quality. The remote control includes automatic spraying sequence start and stop functions (air, concrete and additive) and permits full regulation of the concrete output, as well as adjustments to the predefined additive dosage.
The automatic system for high precision synchronization between the concrete pump and the additive dosing unit maintains the additive dosage proportional to the concrete flow, assure spraying accuracy and quality. The sturdy chassis with 4-wheel-drive, 4-wheel steering and crab-mode provides maneuverability in difficult driving situations.
Технически характеристики
Length | 7.800 mm |
Width | 2.400 mm |
Height | 3.000 mm |
Ground clearance | 330 mm |
Distance between axles | 4.450 mm |
Max. longitudinal gradient while driving | 0,35 |
Max. transversal gradient while driving | 0,1 |
Inner turning radius | 2.628 mm |
Outer turning radius | 6.370 mm |
Weight | 16.000 kg / 15.500 kg without compressor Brake Hydraulic |
Putzmeister telescopic spraying arm SA 17.2 | |
Maximum spraying reach vertical / horizontal | 17 m / 15 m |
Minimum unfolding section vertical /horizontal | 4 m / 7,7 m |
Minimum working section vertical /horizontal | 3 m / 2,8 m |
Number of arm extensions | 2 telescopic |
Telescopic stroke | 2 x 2.000 mm |
Number of axles / degress of freedom | 9 |
Maximum arm angle | +60º / +30º -23º / -62º |
Lights | 2 spotlights 750 W, halogen |
Spraying head | |
Rotation | 360º |
Inclination | +120º / -120º |
Nutation | 8º |
Nozzle | DN40 / DN50 |
Putzmeister concrete pump PM 1810 | |
Type | Double-piston, hydraulic drive |
Max. flow (theor.) | 4 – 30 m3/h |
Transport cylinder diameter | 180 mm |
Max. Pressure (theor.) on concrete | 75 bar |
Max. aggregate size | 16 mm |
Automatic lubrication system | |
Hopper | |
Full hopper capacity | 350 l |
Filling height | 1.440 mm |
Spotlight | Spotlight 24 V / 70 W |
Pumping and spraying drive system | |
Electric | 55 kW |
Diesel (DUAL DRIVE version) | Carrier Diesel engine |
Additive pump synchronized with concrete pumping | |
Adjustment range | 30 – 700 l/h |
Maximum working pressure | 10,5 bar |
Additive tank | 1.000 l |
Control system | PLC |
Chassis | |
Engine | Diesel, 4 cylinders |
Engine power | 70 kW at 2.200 rpm |
Engine emissions | In line with EU-Stage III A / EPA-Tier 3 |
Transmission | Hydrostatic |
Gearbox | 2-speed in both directions |
Steering | Four-wheel hydraulic steering (4WS), crab mode |
Traction | 4 WD |
Speed | Max. 20 km/h |
Breaking system | Service brakes: 4-wheel hydraulic multi-disc brakes in oil bath, Parking brake: 2-wheel independent, hydraulic multi-disc brakes in oil bath, manual. Emergency brake |
Working lights | 4 halogen spotlights 24 V 70 W H3 |
Driver cabin | FOPS/ROPS certified, with 180ª swivel seat |
Oil tank | 390 l |
Electrical equipment | 2 x 12 V 110 A batteries |
Diesel tank | 150 l |
Putzmeister remote control | |
Drive | Cable / radio (optional) |
Cable length | 15 m |
Cable reel | |
Operation | Hydraulic |
Collector | 4 x 300 A, 36 rpm |
Cable length | 50 m / 100 m optional |
Cable diameter | 53-61 mm |
Power | at 400 V 50 Hz or at 440 V 60 Hz |
Diameter | 1.400 mm |
Brake | Hydraulic |
High pressure water pump for cleaning | |
Motor output | 6 kW |
Max. pressure | 200 bar |
Flow | 15 l/min |
Hose | 15 m |
Optional equipment | |
Electric Compressor | |
Power | 75 kW |
Max. working pressure | 7,5 bar |
Max. air flow | 11 m3/min |
Diesel Compressor | |
Power | 70 kW |
Max. working pressure | 7,0 bar |
Max. air flow | 11 m3/min |
Fire extinguishing system | |
Drive | Automatic / manual |
Other | |
Complete spare wheel MITAS M PT-02 / Rim size 18 x 19.5 ’’ | |
Proportional radio remote control | |
100 m special cable for 1000 V | |
Additive tank with stainless steel protection | |
Catalytic converter | |
Particle filter | |
Tramming direction lights | |
Special voltages | |
Power | at 660 V 50/60 Hz, or at 1.000 V 50/60 Hz |
Maximum theoretical values listed. | |
Specifications subject to change without prior notice. | |
Photos and drawings are for illustrative purposes only. | |
For available options, please consult the factory. |